View Reports, News and Statistics Related to Your Home State

U.S. E.P.A. to sample indoor air at Oakland homes, businesses near former plating shop

Subscribe to our Emergency Response Environment News RSS Feed
Category: Emergency Response
Type: News
Source: EPA
Date: Wednesday, July 23rd, 2008

High levels of VOCs found underground in Oakland

(San Francisco, California -- 07/23/08) - On Friday, the E.P.A. will begin testing the air inside several nearby homes, an adjacent business, and a day care center near the former Lane Metal Finishers site, where high levels of volatile organic compounds were found underground in Oakland, California

Department of Toxic Substances Control scientists discovered elevated levels of VOCs in 5 samples taken at 8 feet below the surface of the former metal plating location located at 30th Street & San Pablo Avenue. DTSC contacted the E.P.A. to sample the indoor air to see if contaminants in the soil have migrated and are accumulating in nearby homes and businesses.

"Because of the unknowns below the surface of the rest of the site, the E.P.A. will sample the indoor air as a precautionary measure," said Bret Moxley, the EPA's on-scene coordinator. "The E.P.A. and DTSC are working together to make sure that VOCs are not accumulating indoors, and if needed, will take the necessary steps until the situation is remedied."

The underground samples showed very high levels of VOCs, particularly trichloroethylene (TCE), cis-dichloroethene, trans dichloroethene and vinyl chloride in the soil vapor. Soil vapor is in the spaces between the grains of sand or soil underground. Soil vapor can move through soil, but does not move as easily through clay and silt as it does in sandy soil. This location does have several clay layers in the soil which may have reduced the migration of the soil vapors.

Once under a home or other building, it is possible for vapors to come up through cracks in foundations and accumulate inside. If indoor VOC levels are high enough, it can create a health hazard for residents, especially children and pregnant women.

Soil, soil vapor and groundwater contamination at the Lane Metals facility is most likely the result of solvents used as degreasers during plating operations on the location dating back to the 1950s. The solvents are not uncommon at plating shop sites. DTSC has been overseeing the investigation of the location since June 2007.


  User Comments  
There are currently no comments for this story. Be the first to add a comment!
Click here to add a comment about this story.
  Green Tips  
Turn up your air conditioning in the summer by a few degrees and turn down the heat in winter by a few degrees.
  Featured Report  
PCB Facility Reports
Find out the facilities in your state that have reported PCB activity

View Report >>

  Green Building  
Sustainable Building Advisor Program- The Next Great Step
Beyond LEED - check out The Sustainable Building Advisor Program....Read Complete Article >>

All Green Building Articles